uptown real estate sign post
  • uptown real estate sign post
  • modern sign post

Uptown Sign Post

Tax excluded

Brand new Product Uptown Aluminum Real Estate Sign Post with a mitered corner.  Available in various colors.  White and black are stock colors.  Red, grey, and blue are non-stock and require a few days for fabrication.  This product was designed for cheap shipping and universal application and should fit 90% of all hanging sign panel sizes right out of the box. The 66 inch vertical post comes in 2 pieces for compact shipping and storage. Universal arm works for signs 24 to 30 inches wide.  

Sign not included.  Custom post length, arm length, and colors are available upon request.  See details below.

Notes and special instructions can be added at checkout.

Color: White


Encrypted Secure Transactions

The vertical post comes in 2 pieces in order to fit into a smaller box and that enables us to offer you discounted shipping. Works for signs up to 30 inches wide.  Includes aluminum caps on the post and arm powder coated to match the post.  Also Includes a steel stake and all required hardware to hang your sign.

Hardware included: steel ground stake, 2 eyebolts, 2 safety pin clips, 2 sign rider clips with screws, corner brace with screws.


Post: 66 inces x 2 3/4 inches x 2 1/4 inches (2-piece post)
 36 x 2 3/4 inches x 2 1/4 inches
Stake: 34 inches long - 1 1/2 inch steel angle iron

Custom post and arm lengths available upon request.

Sign Fastener locations.  spaced 16 inches or 19 inches apart.

Customization will add time to order processing.

Assemby and Installation instructions


1. Pound the stake into the ground to a sufficient depth (a small sledge hammer is ideal).
2. Slide the lower post (with sleeve) over the stake.
3. Slide the upper post over the sleeve on the lower post, fasten with screw.
4. Slide the corner brace into the mitred end of the arm, fasten with screw.
5. Attach the arm to the post by sliding the corner brace into the mitred end of the upper post, fasten with screw.
6. Screw the eye bolts into the threaded grommets to the desired depth. Attach your sign to the eye bolts with the safety pin clips. attach the optional rider clips to the top of the arm as desired.