- -25%

This product could have some minor defects like paint imperfections or small dents. It is still usable and generally looks good from a distance. Limited Quantities.
This product was designed for cheap shipping and universal application and should fit 90% of all hanging sign panel sizes right out of the box. Red powder coated aluminum. The 66 inch vertical post comes in 2 pieces in order to fit into a smaller box. Universal arm works for signs 24 to 30 inches wide.
Includes aluminum caps on the post and arm powder coated to match the post. Also Includes a steel stake and all required hardware to hang your sign. Sign fastener spacing 16 or 19 inches apart.
Encrypted Secure Transactions
CAUTION: HAVE ALL UNDERGROUND UTILITIES MARKED BEFORE INSTALLATION
1. Pound the stake into the ground to a sufficient depth (a small sledge hammer is ideal).
2. Slide the lower post (with sleeve) over the stake.
3. Slide the upper post over the sleeve on the lower post, fasten with screw.
4. Attach the arm to the post.
5. Screw the eye bolts into the threaded grommets to the desired depth. Attach your sign to the eye bolts with the safety pin clips. attach the optional rider clips to the top of the arm as desired.
NON STOCK - Please allow a few days for fabrication.