blue real estate sign posts
search
  • blue real estate sign posts
  • blue real estate sign post
  • blue sign post

Blue Real Estate Sign Post

$126.80
Tax excluded

Blue Colonial Real Estate Sign Post.  This product was designed for cheap shipping and universal application and should fit 90% of all hanging sign panel sizes right out of the box.  Blue powder coated aluminum. The 66 inch vertical post comes in 2 pieces in order to fit into a smaller box. Universal arm works for signs 24 to 30 inches wide.  

Includes aluminum caps on the post and arm powder coated to match the post.  Also Includes a steel stake and all required hardware to hang your sign.  Sign fastener spacing 16 or 19 inches apart.

This is a non-stock item.  Please allow a few days for fabrication.

Color: Blue
Quantity

 

Encrypted Secure Transactions

Blue Colonial Real Estate Sign Post. Made out of aluminum. The vertical post comes in 2 pieces in order to fit into a smaller box and that enables us to offer you discounted shipping. Works for signs 24 to 30 inches wide.  Includes aluminum caps on the post and arm powder coated to match the post.  Also Includes a steel stake and all required hardware to hang your sign.

Hardware included: steel ground stake, 2 eyebolts, 2 safety pin clips, 2 sign rider clips with screws.

Dimensions: 

Post: 66 inces x 2 3/4 inches x 2 1/4 inches (2-piece post)
Universal Arm:
 41 x 2 3/4 inches x 2 1/4 inches, holds 24 or 30 inch signs
Stake: 32 inches long - 1 1/2 inch steel angle iron

Custom post and arm lengths available upon request, please allow extra time for fabrication.

Sign Fastener locations.  spaced 16 inches or 19 inches apart.

Customization will add time to order processing.

Assemby and Installation instructions

CAUTION: HAVE ALL UNDERGROUND UTILITIES MARKED BEFORE INSTALLATION

1. Pound the stake into the ground to a sufficient depth (a small sledge hammer is ideal).
2. Slide the lower post (with sleeve) over the stake.
3. Slide the upper post over the sleeve on the lower post, fasten with screw.
4. Attach the arm to the post.
5. Screw the eye bolts into the threaded grommets to the desired depth. Attach your sign to the eye bolts with the safety pin clips. attach the optional rider clips to the top of the arm as desired.

11042